This is an old revision of the document!
Standard Marlin compatible G-codes can be found at the RepRap wiki: G-code.
Not all standard G-code are supported by the MP Select Mini.
|M552||Display IP address|
|M555 P1||Reset WiFi interface (Seems to reboot printer)|
|M556||Display network status|
|M560||Update firmware using update.bin in microSD card|
|M561||Change thermistor type (Hotend and/or Heat bed)|
|M562||Invert stepper motor direction|
|M563||Enable fast mode for web uploading|
|M564 address_without_http||HTTP Download (Unsure how to use)|
|M565||Print cached file cache.gc|
*Some of the above commands may not work with firmware versions 22.39 & older. They have been implemented in 26.42 & higher.
M550 SSID ;SSID = Name of WiFi network (case sensitive) M551 PASSWORD ;PASSWORD = Password for WiFi network (case sensitive)
M561 P1 ;Change to 104GT-2 (will report as 104GT) M500 ;Save EEPROM Reboot printer to complete the process Or M561 P0 ;Change to original/stock M500 ;Save EEPROM Reboot printer to complete the process
M562 E ;Inverts extruder motor direction M500 ;Saves changes to EEPROM Reboot printer to complete the process
M563 S6 ;S value can be 2-6
M21 ;Initialize SD card M20 ;List SD card M566 new_file_name.gc ;renames cache.gc to a user given file name M20 ;List SD card (to verify file was renamed)