User Tools

Site Tools


Sidebar


User's Manual & Quick Start Guide

Specifications

Where to Purchase

Donations & Support

Replacements Parts & Information

Mods & Improvements

How-to

OctoPrint

Slicer Stuff

Troubleshooting

Maintenance

WiFi

Web UI

Firmware

Downloads

Donations & Support


Amazon Affiliate Program Disclosure

Looking for the Malyan M300 Mini Delta 3D Printer Site?

extruder_calibration

Extruder Calibration


Default values

Steps per unit (mm)
X Y Z E
V1 93.00 93.00 1097.50 97.00
V2 46.50 46.50 548.75 48.50
V2 mid June 2017 93.00 93.00 1097.50 97.00

View current values

  1. Send command “M503” (Sending G-code)
    • (USB only for most V2's. Some early V2's and V1's should be able to receive response via WiFi also.)
  2. Look for:
    • “Steps per unit:”
    • V1: “M92 X93.00 Y93.00 Z1097.50 E97.00”
    • V2: “M92 X46.50 Y46.50 Z548.75 E48.50”
      • or
    • V2: “M92 X93.00 Y93.00 Z1097.50 E97.00”

“E97.00” in the V1 example above are the E steps per mm


NOTE: When sending commands manually there needs to be a space between the command and the parameters.
For example:
G92E0 needs to be G92 E0


Triffid Hunter's Calibration Guide - E steps
http://reprap.org/wiki/Triffid_Hunter's_Calibration_Guide#E_steps

How to calibrate the Extruder on your 3d Printer
http://www.instructables.com/id/How-to-calibrate-the-Extruder-on-your-3d-Printer/

Calibration - Extrusion
http://reprap.org/wiki/Calibration#Extrusion

How To Calibrate Your Extruder
https://www.matterhackers.com/articles/how-to-calibrate-your-extruder

extruder_calibration.txt · Last modified: 2018/01/03 22:56 by Matthew Upp