This is an old revision of the document!
|Steps per unit (mm)|
|V2 mid June 2017||93.00||93.00||1097.50||97.00|
“E97.00” in the V1 example above are the E steps per mm
NOTE: When sending commands manually there needs to be a space between the command and the parameters.
G92E0 needs to be G92 E0
Triffid Hunter's Calibration Guide - E steps
How to calibrate the Extruder on your 3d Printer
Calibration - Extrusion
How To Calibrate Your Extruder