Recovery Method - Motion Controller [MP Select Mini / Malyan M200 3D Printer]

firmware:motion_controller_recovery

This is an old revision of the document!

Recovery Mode - Motion Controller

Link to firmware: https://goo.gl/YTwBs9

The recovery mode method can be used as follows:

Copy the “update.bin” firmware file to the SD card.
Copy any random file larger than 1MB(megabyte) to the SD card and rename to “fcupdate.flg”. Or create a file named “fcupdate.flg” and copy to the SD card. The file size seems not to matter.
Power on the printer. When the printer is powered on, it will force the update.
IMPORTANT: After successfully updating, remove the SD Card and delete the “fcupdate.flg” file. You may also delete the “update.bin”.

firmware/motion_controller_recovery.1471853935.txt.gz · Last modified: 2016/08/22 08:18 by Matthew Upp