User Tools

Site Tools


Sidebar


User's Manual & Quick Start Guide

Specifications

Where to Purchase

Donations & Support

Replacements Parts & Information

Mods & Improvements

How-to

OctoPrint

Slicer Stuff

Troubleshooting

Maintenance

WiFi

Web UI

Firmware

Downloads

Donations & Support


Amazon Affiliate Program Disclosure

Looking for the Malyan M300 Mini Delta 3D Printer Site?

parts:hotend

This is an old revision of the document!


Aftermarket Hotend Replacements


Disclaimer
With the exception of the Genuine E3D v6 & the Genuine E3D Lite6 the replacement hotends listed below are not necessarily recommended replacement options, i.e., they will theoretically work but the quality may vary. These are not the only options available. These should give you a good idea of what to look for. Please do your research or ask the community about their experience.

Autotune note
Some of the options listed below will require updating the firmware's thermistor value using the custom G-code command "M561 P1". If you do change the thermistor type/value you will need to run PID Autotune. If you are able to reuse the Select Mini's original thermistor it is STILL recommended to run PID Autotune


Genuine E3D v6

Genuine E3D v6 HotEnd Full Kit - 1.75mm Universal (Direct) (12v)
http://e3d-online.com/E3D-v6/Full-Kit/v6-1.75mm-Universal
NOTE: Requires updating the firmware's thermistor value. This is done by sending the custom G-code command “M561 P1” & then “M500”.
More info: M561 - Change thermistor type & Thermistors

Genuine E3D All-metal v6 HotEnd Full Kit - 1.75mm Universal (Direct, 12v)
https://www.amazon.com/dp/B00NAK9JFO/
NOTE: Requires updating the firmware's thermistor value. This is done by sending the custom G-code command “M561 P1” & then “M500”.
More info: M561 - Change thermistor type & Thermistors

E3D V6 HOT END KIT https://printedsolid.com/collections/accessories-and-upgrades/products/e3d-hot-end-kit-v6


Genuine E3D v6

NOTE: Requires updating the firmware's thermistor value. This is done by sending the custom G-code command “M561 P1” & then “M500”.
More info: M561 - Change thermistor type & Thermistors

E3D-Online - Genuine E3D v6 HotEnd Full Kit - 1.75mm Universal (Direct) (12v)

Amazon.com - Genuine E3D All-metal v6 HotEnd Full Kit - 1.75mm Universal (Direct, 12v)

Printed Solid - E3D V6 HOT END KIT


Genuine E3D Lite6

Genuine E3D Lite6 Full Kit - 1.75mm Universal (Direct) (12v)
http://e3d-online.com/Lite6-1.75mm-Universal
NOTE: Requires updating the firmware's thermistor value. This is done by sending the custom G-code command “M561 P1” & then “M500”.
More info: M561 - Change thermistor type & Thermistors

Genuine E3D Lite6 Full Kit - 1.75mm Universal (Direct) (12v)
https://www.amazon.com/dp/B00W4E5ITI/
NOTE: Requires updating the firmware's thermistor value. This is done by sending the custom G-code command “M561 P1” & then “M500”.
More info: M561 - Change thermistor type & Thermistors

https://printedsolid.com/collections/accessories-and-upgrades/products/lite6


All Metal V6 Universal Hotend for 1.75mm Filament
https://reprapchampion.com/collections/hotends/products/metal-j-head-v6-hotend-1-75mm-filament-0-4mm-universal-extruder-reprap-3dprinter
NOTE: You should be able to use the Select Mini's original thermistor. Using the thermistor included with this kit will require updating the firmware's thermistor value. This is done by sending the custom G-code command “M561 P1” & then “M500”.
More info: M561 - Change thermistor type, Thermistors, & Sending G-code

RepRap Champion All Metal V6 Universal Hotend for 1.75mm Filament 0.4mm Nozzle RepRap 3D Printer
https://www.amazon.com/dp/B01G5IMS14/
NOTE:You should be able to use the Select Mini's original thermistor. Using the thermistor included with this kit will require updating the firmware's thermistor value. This is done by sending the custom G-code command “M561 P1” & then “M500”.
More info: M561 - Change thermistor type, Thermistors, & Sending G-code

Metal J-head V6 Hotend 1.75mm Filament 0.4mm Bowden Extruder Reprap 3D Printer with 1 Meter Tubing
https://www.amazon.com/dp/B010MSTVZO/
NOTE: Does not require updating the firmware's thermistor value.

Metal J-head Hot end for 1.75mm. Extruder. with Fan, Heater & Thermistor 0.02, 0.03, 0.04, OR 0.05mm nozzle
http://directvoltage.com/hotends-parts/168-metal-j-head-hot-end-for-175mm-extruder-with-fan-heater-thermistor-02030405mm-nozzle.html
NOTE: You must choose which nozzle size. The Select Mini comes with 0.4mm. Does not require updating the firmware's thermistor value.

parts/hotend.1488181604.txt.gz · Last modified: 2017/02/27 07:46 by Matthew Upp