User Tools

Site Tools


parts:microsd_card

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision Both sides next revision
parts:microsd_card [2019/02/06 19:17]
Matthew Upp
parts:microsd_card [2019/02/06 19:18]
Matthew Upp
Line 32: Line 32:
  
 You can try the same with the lower capacity cards also but using smaller allocation unit/ block sizes. Also try FAT(16) with different allocation unit/ block sizes. You can try the same with the lower capacity cards also but using smaller allocation unit/ block sizes. Also try FAT(16) with different allocation unit/ block sizes.
 +
 +----
 +
 +===== Problems that may be related to the microSD card =====
 +  * the printer heats up and never starts printing
 +  * the printer heats up and never starts printing but the progress bar continues to fill
 +  * the printer stops printing but the temps remain and the progress bar continues to fill
 +  * the printer goes through the starting script and then goes where it shouldn'​t (this could happen for other reasons also such as incorrect slicer settings)
 +
 +Follow the link below for more information. \\
 +[[troubleshooting:​not_printing|Printer Stops or Never Starts Printing]]
parts/microsd_card.txt · Last modified: 2019/12/30 07:50 by Matthew Upp