User Tools

Site Tools


parts:microsd_card

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
parts:microsd_card [2019/02/06 19:17]
Matthew Upp
parts:microsd_card [2019/02/06 19:18] (current)
Matthew Upp
Line 32: Line 32:
  
 You can try the same with the lower capacity cards also but using smaller allocation unit/ block sizes. Also try FAT(16) with different allocation unit/ block sizes. You can try the same with the lower capacity cards also but using smaller allocation unit/ block sizes. Also try FAT(16) with different allocation unit/ block sizes.
 +
 +----
 +
 +===== Problems that may be related to the microSD card =====
 +  * the printer heats up and never starts printing
 +  * the printer heats up and never starts printing but the progress bar continues to fill
 +  * the printer stops printing but the temps remain and the progress bar continues to fill
 +  * the printer goes through the starting script and then goes where it shouldn'​t (this could happen for other reasons also such as incorrect slicer settings)
 +
 +Follow the link below for more information. \\
 +[[troubleshooting:​not_printing|Printer Stops or Never Starts Printing]]
parts/microsd_card.txt · Last modified: 2019/02/06 19:18 by Matthew Upp