User Tools

Site Tools


parts:nozzle

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
parts:nozzle [2016/11/04 04:14]
Matthew Upp
parts:nozzle [2019/10/23 02:37] (current)
Matthew Upp
Line 1: Line 1:
-===== Nozzle ​Replacements ​=====+~~NOTOC~~ 
 +====== Nozzle ​======
  
-==== Amazon ==== +----
-<​del>​**//​3maker J-head Extruder Hotend Copper Volcano Nozzle 0.4mm for 3D Printer 1.75mm Filament//​** \\ +
-https://​www.amazon.com/​dp/​B01EUWCX4Y/​ \\ +
-//These nozzles have the same dimensions as the stock nozzle. No idea as to why the product title has "​Volcano"​ in it. This is far from the length of an E3D Volcano nozzle.//</​del>​+
  
-The nozzles above are not the same length as the stock. I __thought__ I measured the nozzles before using them. The threaded side is 1.17mm shorter than the original. +<WRAP group> 
-The stock nozzle has an overall length of 10mm. The threaded side is 5mm making the output ​half also 5mm. The threads are M6x1.0 and the nozzle opening diameter is 0.4mm \\+<WRAP column ​half>
  
  
-==== Nozzle ​Dimensions ====+====Dimensions ​=====
  
-{{:m200_nozzle_dimensions.jpg?600|}}+[[parts:​nozzle#​replacements|Jump to replacements]] 
 + 
 +==== V1 ==== 
 +The V1 nozzle has an overall length of 10mm. \\ 
 +Threads are M6x1.0 with a 5mm length. \\ 
 +Nozzle opening diameter is 0.4mm \\ 
 +<wrap lo>(For reference a genuine E3D nozzle has a thread length of 7.5mm)</​wrap>​ \\ 
 + 
 +==== V2 & Pro ===== 
 +The V2 nozzle has an overall length of 11.5mm. \\ 
 +Threads are M6x1.0 with a 6.5mm length. \\ 
 +Nozzle opening diameter is 0.4mm \\ 
 +<wrap lo>(For reference a genuine E3D nozzle has a thread length of 7.5mm)</​wrap>​ \\ 
 + 
 + 
 +/* {{ :parts:​m200_nozzle-dimensions.jpg?250 |Overall length of 10mm. 
 +Threads are M6x1.0 with a 5mm length. 
 +Nozzle opening diameter is 0.4mm}}  
 + 
 + 
 +{{gallery>​parts:?​m200_nozzle_*.jpg&​150x150&​0&​lightbox }} */ 
 + 
 + 
 +</​WRAP>​ 
 + 
 + 
 +<WRAP column half> 
 + 
 + 
 +===== Replacements ===== 
 + 
 +==== V1 ==== 
 + 
 +GiGDigit - [[https://​gigdigit.com/​nozzle-select-mini-v1|Nozzle - Select Mini V1]] 
 + 
 +==== V2 & Pro ==== 
 + 
 +GiGDigit - [[https://​gigdigit.com/​nozzle-0-4mm-select-mini-v2-mini-delta-qty-2/​|Nozzle - 0.4mm - Select Mini V2, Pro/V3, Mini Delta, and MP10's - (Qty 2)]] 
 + 
 + 
 + 
 +---- 
 + 
 +**Any nozzle with M6 threads should work but will probably have to make adjustments to the bed and/or heat break/​throat. You may also want to look into using a [[thingiverse:​z-spacers|Z Spacer]] if choosing this option.** 
 + 
 + 
 +</​WRAP>​ 
 +</​WRAP>​
  
parts/nozzle.1478232847.txt.gz · Last modified: 2016/11/04 04:14 by Matthew Upp