User Tools

Site Tools


parts:nozzle

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
parts:nozzle [2017/02/25 01:58]
Matthew Upp
parts:nozzle [2019/10/23 02:37] (current)
Matthew Upp
Line 1: Line 1:
 ~~NOTOC~~ ~~NOTOC~~
-====== Nozzle ​Dimensions ​======+====== Nozzle ====== 
 + 
 +----
  
 <WRAP group> <WRAP group>
Line 6: Line 8:
  
  
-[[nozzle#​nozzle_replacements|Nozzle replacements listed below]]+===== Dimensions =====
  
-The stock nozzle has an overall length of 10mm. \\+[[parts:​nozzle#​replacements|Jump to replacements]] 
 + 
 +==== V1 ==== 
 +The V1 nozzle has an overall length of 10mm. \\
 Threads are M6x1.0 with a 5mm length. \\ Threads are M6x1.0 with a 5mm length. \\
 Nozzle opening diameter is 0.4mm \\ Nozzle opening diameter is 0.4mm \\
 +<wrap lo>(For reference a genuine E3D nozzle has a thread length of 7.5mm)</​wrap>​ \\
  
 +==== V2 & Pro =====
 +The V2 nozzle has an overall length of 11.5mm. \\
 +Threads are M6x1.0 with a 6.5mm length. \\
 +Nozzle opening diameter is 0.4mm \\
 +<wrap lo>(For reference a genuine E3D nozzle has a thread length of 7.5mm)</​wrap>​ \\
  
  
-</WRAP>+/* {{ :​parts:​m200_nozzle-dimensions.jpg?​250 |Overall length of 10mm. 
 +Threads are M6x1.0 with a 5mm length. 
 +Nozzle opening diameter is 0.4mm}} ​
  
-<WRAP column half> 
- 
- 
-{{ :​parts:​m200_nozzle-dimensions.jpg?​250 |}} 
  
 +{{gallery>​parts:?​m200_nozzle_*.jpg&​150x150&​0&​lightbox }} */
  
  
-</​WRAP>​ 
 </​WRAP>​ </​WRAP>​
  
  
 +<WRAP column half>
  
-{{gallery>​parts:?​m200_nozzle_*.jpg&​150x150&​0&​lightbox }} 
  
-\\+===== Replacements =====
  
-----+==== V1 ====
  
-====== ​Nozzle ​Replacements ======+GiGDigit - [[https://​gigdigit.com/​nozzle-select-mini-v1|Nozzle ​- Select Mini V1]]
  
-HobbyKing ​Malyan'​s Alibaba store have a nozzle with the exact height and thread size but the nozzle opening is 0.35mm. It is a bit expensive for a single nozzle though. \\+==== V2 Pro ====
  
 +GiGDigit - [[https://​gigdigit.com/​nozzle-0-4mm-select-mini-v2-mini-delta-qty-2/​|Nozzle - 0.4mm - Select Mini V2, Pro/V3, Mini Delta, and MP10's - (Qty 2)]]
  
-**Malyan M180 - Replacement Tip 0.35** \\ 
-https://​hobbyking.com/​en_us/​replacment-35-tips-for-them180.html 
  
  
-**Malyan 3d printer mating 0.35mm Nozzle** \\ +----
-https://​wholesaler.alibaba.com/​product-detail/​Malyan-3d-printer-mating-0-35mm_60395931791.html+
  
 +**Any nozzle with M6 threads should work but will probably have to make adjustments to the bed and/or heat break/​throat. You may also want to look into using a [[thingiverse:​z-spacers|Z Spacer]] if choosing this option.**
  
-**3maker J-head Extruder Hotend Copper Volcano Nozzle 0.4mm for 3D Printer 1.75mm Filament** \\ 
-<wrap hi>//​These nozzles do not have the same thread length as the stock nozzle. The threaded side is 1.17mm shorter than the original. You can get these nozzles to work by tightening the heat break/​filament guide all the way to the threaded half of the nozzle. If you miss this step filament may ooze out the sides. No idea as to why the product title has "​Volcano"​ in it. This nozzle is far too short to be an E3D Volcano nozzle.//</​wrap>​ \\ 
-https://​www.amazon.com/​dp/​B01EUWCX4Y/​ 
-\\ 
  
- +</​WRAP>​ 
-Monoprice has said that they are hoping to have replacement parts available for purchase from their site by the end of 2016 or first quarter of 2017. +</WRAP>
- +
-In the meantime any nozzle with M6 threads will work. You may have to make adjustments to the bed and/or heat break.+
  
parts/nozzle.1487987910.txt.gz · Last modified: 2017/02/25 01:58 by Matthew Upp