This is an old revision of the document!
Note: The X-Axis, Y-Axis, and Extruder all use the same Nema 17 Stepper Motor
The Z-Axis table is incomplete. Will complete in the next day or two.
http://www.digikey.com/product-detail/en/portescap/403-1009-ND/
Model No. | Step Angle | Motor Length | Voltage - Rated | Current /Phase | Coil Resistance | Torque -Holding | # of Leads | Rotor Inertia | Mass | Diameter - Shaft |
---|---|---|---|---|---|---|---|---|---|---|
( °) | (L)mm | VDC | A | Ω (Ohms) | oz-in / mNm | No. | g.cm | Kg | in / mm | |
42M048C1B | 7.5 | 34 | 5 | 0.55 | 9.1 | 11.9 / 84 | 4 | 12.5 | 0.22 | 0.118 / 3.00 |
Jingkong Motor - model no. JK42HS34-1334
http://www.jkongmotor.com/Product.asp?Action=View&ProductID=437&Catalog=13
Model No. | Step Angle | Motor Length | Current /Phase | Resistance /Phase | Inductance /Phase | Holding Torque | # of Leads | Detent Torque | Rotor Inertia | Mass |
---|---|---|---|---|---|---|---|---|---|---|
( °) | (L)mm | A | Ω | mH | kg.cm | No. | g.cm | g.cm | Kg | |
JK42HS34-1334 | 1.8 | 34 | 1.33 | 2.1 | 2.5 | 2.6 | 4 | 120 | 34 | 0.22 |
Jingkong Motor - model no. JK42HS34-1334
http://www.jkongmotor.com/Product.asp?Action=View&ProductID=437&Catalog=13
Model No. | Step Angle | Motor Length | Current /Phase | Resistance /Phase | Inductance /Phase | Holding Torque | # of Leads | Detent Torque | Rotor Inertia | Mass |
---|---|---|---|---|---|---|---|---|---|---|
( °) | (L)mm | A | Ω | mH | kg.cm | No. | g.cm | g.cm | Kg | |
JK42HS34-1334 | 1.8 | 34 | 1.33 | 2.1 | 2.5 | 2.6 | 4 | 120 | 34 | 0.22 |
Jingkong Motor - model no. JK42HS34-1334D
Please note that the extruder motor has a “D” shaped shaft.
http://www.jkongmotor.com/Product.asp?Action=View&ProductID=437&Catalog=13
Model No. | Step Angle | Motor Length | Current /Phase | Resistance /Phase | Inductance /Phase | Holding Torque | # of Leads | Detent Torque | Rotor Inertia | Mass |
---|---|---|---|---|---|---|---|---|---|---|
( °) | (L)mm | A | Ω | mH | kg.cm | No. | g.cm | g.cm | Kg | |
JK42HS34-1334 | 1.8 | 34 | 1.33 | 2.1 | 2.5 | 2.6 | 4 | 120 | 34 | 0.22 |