User Tools

Site Tools


Sidebar


User's Manual & Quick Start Guide

Specifications

Where to Purchase

Donations & Support

Replacements Parts & Information

Mods & Improvements

How-to

OctoPrint

Slicer Stuff

Troubleshooting

Maintenance

WiFi

Web UI

Firmware

Downloads

Donations & Support


Amazon Affiliate Program Disclosure

Looking for the Monoprice MP Mini Delta Site?

slicers:cura

This is an old revision of the document!


Cura


Profile

cura_3-mpsm.zip

NOTE: This profile works with Cura 3.0.4. This profile may not work with Cura 3.1.0 Seems that the only problem is the nozzle diameter drop-down doesn't work. The default nozzle size for the profile is 0.4mm so as long as the printer has the stock nozzle (0.4mm) installed this profile should work.


INSTALLATION INSTRUCTIONS

  1. Run Cura at least once. You can quit the Add Printer wizard. Make sure Cura is closed before you continue.
  2. Unpack the file into your user settings folder.
    • Windows: %USERPROFILE%\AppData\Roaming\cura\3.0
    • macOS: ~/Library/Application Support/cura/3.0
    • Linux: ~/.local/share/cura/3.0

slicers/cura.1512983929.txt.gz · Last modified: 2017/12/11 09:18 by Matthew Upp