cura_3-mpsm_-_20171224_0448.zip

NOTE: This profile works with Cura 3.0.4. This profile may not work with Cura 3.1.0. It seems that the only problem is the nozzle diameter drop-down doesn't work. The default nozzle size for the profile is 0.4mm so as long as the printer has the stock nozzle (0.4mm) installed this profile should work.

1. Run Cura at least once. You can quit the Add Printer wizard. Make sure Cura is closed before you continue.
2. Unpack the file into your user settings folder.
   • Windows: %USERPROFILE%\AppData\Roaming\cura\3.0
   • macOS: ~/Library/Application Support/cura/3.0
   • Linux: ~/.local/share/cura/3.0