This is an old revision of the document!
This page contains Cura profile downloads and installation instructions.
Ultimaker Cura software downloads page - https://ultimaker.com/en/products/ultimaker-cura-software
Cura 3.0 Online Manual - https://ultimaker.com/en/resources/51947-interface-overview
Original profile created by: Brian Corbino
Original profile shared at: MP Select Mini Owners Facebook Group
Original version created for: 3.0.3
Original filename: MPSM.zip
Original date shared: October 22, 2017
Profile last update: Check the .zip filename
Changes made to original profile: N/A
NOTE: This profile works with Cura 3.0.4. This profile may not work with Cura 3.1.0. It seems that the only problem is the nozzle diameter drop-down doesn't work. The default nozzle size for the profile is 0.4mm so as long as the printer has the stock nozzle (0.4mm) installed this profile should work.
The steps shown in the video are almost identical for the Select Mini.
The main difference is the name of the printer you select in the “Add Printer” wizard.
MP Mini Delta - Import Printer Profile for Cura 3.0.4
The steps shown in this video are almost identical for the Select Mini