User Tools

Site Tools


User's Manual & Quick Start Guide


Where to Purchase

Donations & Support

Replacements Parts & Information

Mods & Improvements



Slicer Stuff




Web UI



Donations & Support

Amazon Affiliate Program Disclosure

Looking for the Monoprice MP Mini Delta Site?


This is an old revision of the document!


This page contains Cura profile downloads and installation instructions.

Cura Software - Direct Downloads

Other Cura Info


Original profile created by: Brian Corbino
Original profile shared at: MP Select Mini Owners Facebook Group
Original version created for: 3.0.3
Original filename:
Original date shared: October 22, 2017
Profile last update: Check the .zip filename
Changes made to original profile: N/A

NOTE: This profile works with Cura 3.0.4. This profile may not work with Cura 3.1.0. It seems that the only problem is the nozzle diameter drop-down doesn't work. The default nozzle size for the profile is 0.4mm so as long as the printer has the stock nozzle (0.4mm) installed this profile should work.


Installation Instructions

The steps shown in the video are almost identical for the Select Mini.
The main difference is the name of the printer you select in the “Add Printer” wizard.

  1. Run Cura at least once.
    • If you have never opened Cura:
      1. Open Cura
      2. Click “I understand and agree”
      3. Close the “Add Printer” wizard
      4. Close/Exit Cura
  2. Unzip the downloaded file to a destination of your choosing
  3. With Cura closed, copy the definitions, meshes, quality, and variants folders into your user settings folder.
    • Windows: %USERPROFILE%\AppData\Roaming\cura\3.0
    • macOS: ~/Library/Application Support/cura/3.0
    • Linux: ~/.local/share/cura/3.0
  4. Open Cura
  5. From the “Add Printer” wizard click “Other” then scroll down until you find “Monoprice Select Mini”

MP Mini Delta - Import Printer Profile for Cura 3.0.4
The steps shown in this video are almost identical for the Select Mini

slicers/cura.1516767791.txt.gz · Last modified: 2018/01/24 04:23 by Matthew Upp