User Tools

Site Tools


starting_ending_g-code_scripts

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
starting_ending_g-code_scripts [2019/03/24 01:03]
Matthew Upp
starting_ending_g-code_scripts [2019/10/19 01:44] (current)
Matthew Upp
Line 44: Line 44:
 M84 ; disable motors M84 ; disable motors
 G4 S360 ; keep fan running for 360 seconds to cool hotend and allow the fan to be turned off - adjust to your needs G4 S360 ; keep fan running for 360 seconds to cool hotend and allow the fan to be turned off - adjust to your needs
-M107 ; turn off fan. Don't use M106 S1. Some say M107 doesn'​t work for them but if the hotend is below 70 degrees it should work+M107 ; turn off fan. Don't use M106 S1. Using M106 S1 may prevent the fan from turning on for the following print. Some say M107 doesn'​t work for them but if the hotend is below 70 degrees it should work
  
 </​file>​ </​file>​
starting_ending_g-code_scripts.txt · Last modified: 2019/10/19 01:44 by Matthew Upp