User Tools

Site Tools


wifi:android_3dcraft

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
wifi:android_3dcraft [2017/02/19 13:14]
Matthew Upp
wifi:android_3dcraft [2017/10/18 17:35] (current)
Matthew Upp
Line 1: Line 1:
-====== ​Connecting to WiFi =======+~~NOTOC~~ 
 +====== ​Android ​======
  
 +<wrap hi><​wrap em>MP 3D Printer WiFi Connect for Android is located [[wifi:​android|here]].</​wrap></​wrap> ​
  
-===== Android ​===== +===== Connecting to WiFi ===== 
-  - Download the .apk file 3dcraft from http://firmware.mpselectmini.com \\+  - Download the .apk file 3dcraft from [[https://​drive.google.com/​drive/​u/​0/​mobile/​folders/​0BxyFI3iDaicLenBaT21OdlFNVjg/​0BxyFI3iDaicLODVZOHI4SzZBNlE/​0BxyFI3iDaicLNGVpSWRjTEpheW8/​0BxyFI3iDaicLU09LMnc1cnlyTzQ?​usp=sharing|http://f.mpselectmini.com]] \\
       * located in the folders "​Software - Android & Windows Apps" then "​Android App - Malyan 3D Craft"       * located in the folders "​Software - Android & Windows Apps" then "​Android App - Malyan 3D Craft"
   - Disconnect USB cable from the printer   - Disconnect USB cable from the printer
Line 19: Line 21:
 <wrap lo>After doing all the steps below the printer doesn'​t connect to WiFi, try "​updating"​ to UI/LCD firmware version 34. After flashing version 34, the display will show that it is version 33. They forgot to increment the version number. Going back to version 34 helped with my printer received 2016-05-27 but one received 2016-09-02 didn't matter. On my printer received 2016-05-27, UI firmware version 34 is the only version that the smart config dialog stay up after releasing the button.</​wrap>​ <wrap lo>After doing all the steps below the printer doesn'​t connect to WiFi, try "​updating"​ to UI/LCD firmware version 34. After flashing version 34, the display will show that it is version 33. They forgot to increment the version number. Going back to version 34 helped with my printer received 2016-05-27 but one received 2016-09-02 didn't matter. On my printer received 2016-05-27, UI firmware version 34 is the only version that the smart config dialog stay up after releasing the button.</​wrap>​
  
 +**Malyan M200 WiFi Config** \\
 +{{youtube>​XuO_UaUFlBI?​medium}}
  
 ==== NOTES: ==== ==== NOTES: ====
Line 24: Line 28:
   * Disconnect USB cable from the printer if you want to use the WiFi function. ​   * Disconnect USB cable from the printer if you want to use the WiFi function. ​
   * WiFi works with 2.4 GHz b/g/n networks only.   * WiFi works with 2.4 GHz b/g/n networks only.
-  * These next two notes apply to when connecting using the Android ​app.+  * These next two notes apply to when connecting using the Android ​& iOS apps.
     - If you have a 2.4 GHz and 5 GHz network using the same SSID(wireless network name) you may have trouble connecting the printer.     - If you have a 2.4 GHz and 5 GHz network using the same SSID(wireless network name) you may have trouble connecting the printer.
     - For initial WiFi setup try moving the printer closer to the WiFi router.     - For initial WiFi setup try moving the printer closer to the WiFi router.
 +
 +
 +===== Forget Network =====
 +  - Perform the same steps to setup WiFi but use an incorrect password
 +  - The process is complete when:
 +    - The printer'​s LCD will display "Smart config success"​ when the process is complete.
 +    - The phone will either not show any message and time out or will show a "​Mission failed"​ message after a minute or so.
 +    - You will also notice the Select Mini no longer has an IP Address displayed at the top of the printer'​s display. It should say no connection.
 +
  
wifi/android_3dcraft.1487510065.txt.gz · Last modified: 2017/02/19 13:14 by Matthew Upp