User Tools

Site Tools


wifi:android_3dcraft

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
wifi:android_3dcraft [2017/02/19 19:50]
Matthew Upp
wifi:android_3dcraft [2017/10/18 17:35] (current)
Matthew Upp
Line 1: Line 1:
 +~~NOTOC~~
 ====== Android ====== ====== Android ======
  
 +<wrap hi><​wrap em>MP 3D Printer WiFi Connect for Android is located [[wifi:​android|here]].</​wrap></​wrap> ​
  
 ===== Connecting to WiFi ===== ===== Connecting to WiFi =====
-  - Download the .apk file 3dcraft from http://firmware.mpselectmini.com \\+  - Download the .apk file 3dcraft from [[https://​drive.google.com/​drive/​u/​0/​mobile/​folders/​0BxyFI3iDaicLenBaT21OdlFNVjg/​0BxyFI3iDaicLODVZOHI4SzZBNlE/​0BxyFI3iDaicLNGVpSWRjTEpheW8/​0BxyFI3iDaicLU09LMnc1cnlyTzQ?​usp=sharing|http://f.mpselectmini.com]] \\
       * located in the folders "​Software - Android & Windows Apps" then "​Android App - Malyan 3D Craft"       * located in the folders "​Software - Android & Windows Apps" then "​Android App - Malyan 3D Craft"
   - Disconnect USB cable from the printer   - Disconnect USB cable from the printer
Line 26: Line 28:
   * Disconnect USB cable from the printer if you want to use the WiFi function. ​   * Disconnect USB cable from the printer if you want to use the WiFi function. ​
   * WiFi works with 2.4 GHz b/g/n networks only.   * WiFi works with 2.4 GHz b/g/n networks only.
-  * These next two notes apply to when connecting using the Android ​app.+  * These next two notes apply to when connecting using the Android ​& iOS apps.
     - If you have a 2.4 GHz and 5 GHz network using the same SSID(wireless network name) you may have trouble connecting the printer.     - If you have a 2.4 GHz and 5 GHz network using the same SSID(wireless network name) you may have trouble connecting the printer.
     - For initial WiFi setup try moving the printer closer to the WiFi router.     - For initial WiFi setup try moving the printer closer to the WiFi router.
 +
 +
 +===== Forget Network =====
 +  - Perform the same steps to setup WiFi but use an incorrect password
 +  - The process is complete when:
 +    - The printer'​s LCD will display "Smart config success"​ when the process is complete.
 +    - The phone will either not show any message and time out or will show a "​Mission failed"​ message after a minute or so.
 +    - You will also notice the Select Mini no longer has an IP Address displayed at the top of the printer'​s display. It should say no connection.
 +
  
wifi/android_3dcraft.1487533810.txt.gz · Last modified: 2017/02/19 19:50 by Matthew Upp