User Tools

Site Tools


wifi:ios

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
wifi:ios [2018/02/18 18:23]
Matthew Upp
wifi:ios [2021/02/01 11:04] (current)
Matthew Upp
Line 3: Line 3:
 ====== iOS ====== ====== iOS ======
  
 +<WRAP group>
 +<WRAP half column>
 +/**
 + * ===== MP 3D Printer WiFi Connect =====
 + */
  
-[[https://​itunes.apple.com/​us/​app/​mp-3d-printer-wifi-connect/​id1205476135?​ls=1&mt=8|{{ :​wifi:​download_on_the_app_store_badge_us-uk_135x40.png?​135}}]]+<del> **MP 3D Printer WiFi Connect** </del> 
 +===== Espressif Esptouch =====
  
 +</​WRAP>​
  
-===== MP 3D Printer WiFi Connect ===== +<WRAP half column>
-----+
  
-<wrap hi>​Unfortunately my Apple Developer Membership expired February 13, 2018 meaning the app is currently not available for download in the Apple App Store. \\ +/** 
-In February 2017 I paid the $99.00 plus sales tax out of my own pocket to be able to upload the WiFi connect app to the App Store for the community'​s useI can't pay the annual membership cost again being I don't make any money from the app. \\ + * [[https://​itunes.apple.com/us/app/​mp-3d-printer-wifi-connect/​id1205476135?​ls=1&​mt=8|{{ :​wifi:​download_on_the_app_store_badge_us-uk_135x40.png?135}}]] 
-I will try to contact Monoprice again to see if they are willing to pay this years membership feeTo be fair to Monoprice I never asked them for any money for the use of the app in the Select Mini and Mini Delta User's Manual. My first time asking them for money was last week (Monday, February 13, 2018) and only to cover the cost of the Apple Developers Membership fee for this year.</wrap>+ */ 
 + 
 +[[https://​apps.apple.com/​us/​app/​espressif-esptouch/​id1071176700|{{ :​wifi:​ios_as_esptouch_appicon_810x250_20210201.png?​0x58}}]] 
 + 
 + 
 +</WRAP> 
 +</​WRAP>​ 
 + 
 + 
 +----
  
 ===== Connecting to Wi-Fi ===== ===== Connecting to Wi-Fi =====
  
-Follow the steps below to get your Select Mini connected to your existing 2.4 GHz wireless network.+Follow the steps below to get your Select Mini connected to your existing 2.4 GHz wireless network. ​\\ 
 +<wrap lo>​**Note:​** The steps below were originally written for the MP 3D Printer WiFi Connect app. The instructions have been updated but still may have some differences. They should be enough to help walk you through the process.</​wrap>​
  
   - Disconnect USB cable from the printer   - Disconnect USB cable from the printer
   - Turn on the MP Select Mini.   - Turn on the MP Select Mini.
-  - Open the MP 3D Printer WiFi Connect ​App.+  - Open the <​del>//"​MP 3D Printer WiFi Connect"//</​del>​ "//​Espressif Esptouch//"​ app.
   - Verify the correct SSID is displayed.   - Verify the correct SSID is displayed.
   - Enter wireless network password or leave blank if no password is needed.   - Enter wireless network password or leave blank if no password is needed.
Line 26: Line 42:
   - Press and hold the dial button.   - Press and hold the dial button.
   - Release the button when the “Smart config started” message is displayed.   - Release the button when the “Smart config started” message is displayed.
-  - Tap the “Connect to WiFi” button and within 10-60 seconds the process should complete.+  - Tap the <​del>//​“Connect to WiFi”//</​del>​ "​Confirm"​ (or similar, possibly Connect) ​button and within 10-60 seconds the process should complete.
       - The printer'​s screen will display "Smart config success"​ when the process is complete.       - The printer'​s screen will display "Smart config success"​ when the process is complete.
-      - The iPhone will display "MP Select Mini is now connected to Wi-Fi."​+      - The iPhone will display ​<​del>//​"MP Select Mini is now connected to Wi-Fi."​//</​del>​ a message confirming success. ​
       - You will also notice the Select Mini has been assigned an IP Address that is displayed at the top of the printer'​s display.       - You will also notice the Select Mini has been assigned an IP Address that is displayed at the top of the printer'​s display.
  
 <wrap lo> <wrap lo>
-**Note:** If the "Smart config started"​ message does not stay after releasing the button you can hold the button down through the whole process and the message will disappear once the WiFi is connected. ​\\</​wrap>​+**Note:** If the "Smart config started"​ message does not stay after releasing the button you can hold the button down through the whole process and the message will disappear once the WiFi is connected. </​wrap> ​\\
  
  
Line 43: Line 59:
 ==== Trouble connecting ==== ==== Trouble connecting ====
   * If the correct SSID is not displayed, go to the iPhones Wi-Fi settings and switch to the appropriate wireless network.   * If the correct SSID is not displayed, go to the iPhones Wi-Fi settings and switch to the appropriate wireless network.
-  * Wi-Fi and USB cannot access the printer simultaneously.+  * Wi-Fi and USB cannot access the printer simultaneously. It is best to unplug a USB cable from the printer before attempting to set up WiFi. (Simultaneous wifi and USB connections to the printer is possible but some say it doesn'​t work for them. I have sent commands via WiFi and accessed the Web UI while the printer is connected to USB. I would nott recommend sending commands to the printer via WiFi while the printer is printing via USB.
   * Disconnect USB cable from the printer if you want to use the Wi-Fi function.   * Disconnect USB cable from the printer if you want to use the Wi-Fi function.
   * Wi-Fi works with 2.4 GHz b/g/n networks only.   * Wi-Fi works with 2.4 GHz b/g/n networks only.
-  * If you have a 2.4 GHz and 5 GHz network using the same SSID(wireless network name) you may have trouble connecting the printer to your wireless network.+  * If you have a 2.4 GHz and 5 GHz network using the same SSID(wireless network name) you may have trouble connecting the printer to your wireless network. If you can temporarily disable or rename the 5 GHz SSID, you should do so. After an IP address has been assigned an IP address you can enable or change the 5 GHz SSID back to it's original name.
   * For the initial Wi-Fi setup try moving the printer closer to the Wi-Fi router.   * For the initial Wi-Fi setup try moving the printer closer to the Wi-Fi router.
  
Line 62: Line 78:
  
  
-===== Screenshots ===== +===== Screenshots ===== 
 +<wrap lo>The screen captures below are from the "//MP 3D Printer WiFi Connect//"​ that is no longer available. The "//​Espressif Esptouch//"​ looks similar as far as the steps shown above are concerned.</​wrap>​ \\
 {{:​wifi:​1-mp_3d_printer_wifi_connect.png?​direct&​200|}} {{:​wifi:​2-mp_3d_printer_wifi_connect.png?​direct&​200|}} {{:​wifi:​3-mp_3d_printer_wifi_connect.png?​direct&​200|}} {{:​wifi:​1-mp_3d_printer_wifi_connect.png?​direct&​200|}} {{:​wifi:​2-mp_3d_printer_wifi_connect.png?​direct&​200|}} {{:​wifi:​3-mp_3d_printer_wifi_connect.png?​direct&​200|}}
    
wifi/ios.1518978220.txt.gz · Last modified: 2018/02/18 18:23 by Matthew Upp