User Tools

Site Tools


User's Manual & Quick Start Guide


Where to Purchase

Donations & Support

Replacements Parts & Information

Mods & Improvements



Slicer Stuff




Web UI



Donations & Support

Amazon Affiliate Program Disclosure

Looking for the Malyan M300 Mini Delta 3D Printer Site?


This is an old revision of the document!


MP 3D Printer WiFi Connect

Unfortunately my Apple Developer Membership expired February 13, 2018 meaning the app is currently not available for download in the Apple App Store.
In February 2017 I paid the $99.00 plus sales tax out of my own pocket to be able to upload the WiFi connect app to the App Store for the community's use. I can't pay the annual membership cost again being I don't make any money from the app.
I will try to contact Monoprice again to see if they are willing to pay this years membership fee. To be fair to Monoprice I never asked them for any money for the use of the app in the Select Mini and Mini Delta User's Manual. My first time asking them for money was last week (Monday, February 13, 2018) and only to cover the cost of the Apple Developers Membership fee for this year.

Connecting to Wi-Fi

Follow the steps below to get your Select Mini connected to your existing 2.4 GHz wireless network.

  1. Disconnect USB cable from the printer
  2. Turn on the MP Select Mini.
  3. Open the MP 3D Printer WiFi Connect App.
  4. Verify the correct SSID is displayed.
  5. Enter wireless network password or leave blank if no password is needed.
  6. Use the printers dial and display to navigate to the “Move” menu.
  7. Press and hold the dial button.
  8. Release the button when the “Smart config started” message is displayed.
  9. Tap the “Connect to WiFi” button and within 10-60 seconds the process should complete.
    1. The printer's screen will display “Smart config success” when the process is complete.
    2. The iPhone will display “MP Select Mini is now connected to Wi-Fi.”
    3. You will also notice the Select Mini has been assigned an IP Address that is displayed at the top of the printer's display.

Note: If the “Smart config started” message does not stay after releasing the button you can hold the button down through the whole process and the message will disappear once the WiFi is connected. \\


  • This method will work with SSID & passwords that contain multiple spaces, space(s) at the end, special characters, & lower case characters in any location
  • This method will work if WiFi password contains a semicolon “;”
  • This method will work for configuring open system WiFi networks with no password

Trouble connecting

  • If the correct SSID is not displayed, go to the iPhones Wi-Fi settings and switch to the appropriate wireless network.
  • Wi-Fi and USB cannot access the printer simultaneously.
  • Disconnect USB cable from the printer if you want to use the Wi-Fi function.
  • Wi-Fi works with 2.4 GHz b/g/n networks only.
  • If you have a 2.4 GHz and 5 GHz network using the same SSID(wireless network name) you may have trouble connecting the printer to your wireless network.
  • For the initial Wi-Fi setup try moving the printer closer to the Wi-Fi router.

Forget Network

  1. Perform the same steps to setup Wi-Fi but use an incorrect password
  2. The process is complete when:
    1. The printer's screen will display “Smart config success” when the process is complete.
    2. The iPhone will either not show any message and time out or will show a “Mission failed” message after a minute or so.
    3. You will also notice the Select Mini no longer has an IP Address displayed at the top of the printer's display. It should say no connection.



MP 3D Printer WiFi Connect for iOS - Demo

wifi/ios.1518978265.txt.gz · Last modified: 2018/02/18 18:24 by Matthew Upp