User Tools

Site Tools


wifi

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
wifi [2016/11/12 15:30]
Matthew Upp Added G-code file method of connecting to WiFi
wifi [2017/04/27 16:41] (current)
104.132.63.78 ↷ Links adapted because of a move operation
Line 1: Line 1:
-===== Connecting to WiFi =====+~~NOTOC~~
  
-**Link ​to firmware, Malyan Link (Windows PC), Malyan ​3D Craft (Android):** http://​firmware.mpselectmini.com+====== Connecting ​to WiFi ====== 
 +  * [[wifi:​android_3dcraft|Android - 3D Craft]] 
 +  * [[wifi:ios|iOS - MP 3D Printer WiFi Connect]] 
 +  ​[[wifi:​g-code_file|G-code file]] 
 +  ​[[wifi:g-code_usb|USB - G-code]] 
 +  * [[wifi:​windows|Windows - Malyan Link]]
  
-//​**NOTES:​** ​ WiFi and USB cannot access simultaneously. Please disconnect USB from printer if you want to use WiFi function. ​ WiFi seems to only work with 2.4 GHz networks. For initial WiFi setup try moving the printer closer to the WiFi router. // 
  
 +===== Accessing Web UI =====
 +[[wifi:​webui|Accessing Web UI]]
  
-==== Android App - 3D Craft ==== 
-  - Update to latest UI/LCD firmware. (After doing all the steps below the printer doesn'​t connect to WiFi, try "​updating"​ to UI/LCD firmware version 34. After flashing version 34, the display will show that it is version 33. They forgot to increment the version number. Going back to version 34 helped with my printer received 2016-05-27 but one received 2016-09-02 didn't matter). 
-  - Disconnect USB cable 
-  - Press and holding center button on "​Move"​ menu will enter config status. Release button when smart config dialog show. (<​del>​They only version that I have seen the smart config dialog stay up after releasing the button is UI/LCD firmware version 34</​del>​ If the smart config message does not stay after releasing the button you should be able to hold the button down through the whole process and will disappear once the WiFi is connected). 
-  - Run android app 3DCraft to config WiFi per video. 
- 
- 
-==== USB - G-code ==== 
-  - Connect USB to computer 
-  - Use command "M550 SSID" - Replace "​SSID"​ with the name of your WiFi network 
-  - Use command "M551 PASSWORD"​ - Replace "​PASSWORD"​ with the password for your WiFi network 
-  - You should see IP address displayed in title bar where no connection was once displayed 
-<​code>​ 
-M550 SSID         ;SSID = Name of WiFi network (case sensitive) 
-M551 PASSWORD ​    ;​PASSWORD = Password for WiFi network (case sensitive) 
-</​code>​ 
- 
- 
-==== Windows application - Malyan Link ==== 
-  - Install Malyan Link 
-  - Connect USB to computer 
-  - Once installed and running right click the Malyan Link icon in the Windows taskbar. It is a black "​M"​ with a circle around it. 
-  - Select Wifi wizard. "​wifi"​ dialog should box appear 
-  - Select your wireless network from the list or manually input your wireless networks SSID if using a computer without WiFi. If the option to manually input your SSID is not available please download the newest version. 
-  - Click "​Next"​ (clicking the labeled tabs gave me errors) 
-  - Input network password 
-  - Click "​Next" ​ 
-  - Click "​Connect"​ 
-  - Click "​OK"​ on the dialog box displaying "​Please disconnect USB from printer"​ 
-  - Click "​Finish"​ 
-  - Disconnect USB cable from printer and the IP address should show up 
- 
- 
-==== G-code file ==== 
-  - Copy & paste the code section below into a text editor; Windows Notepad, Notepad++, or similar program 
-  - Replace "​SSID"​ with the name of your WiFi network - don't leave spaces after the SSID name 
-  - Replace "​PASSWORD"​ with the password for your WiFi network - don't have spaces after the password 
-  - Save the file with the extension "​.gcode" ​ e.g., "​wifi_setup.gcode"​ 
-  - Copy the file onto a microSD card to place into the printer. 
-  - From the Print menu select the file you just copied to the card. 
-  - The printer will go through a short routine. 
-    - The fan will turn on 
-    - X & Y with move to home position 
-    - SSID & Password will be sent to the printer 
-    - The hot end will move to the center of the bed 
-    - The fan will turn off to signify completion 
-<wrap hi>This method will not work if WiFi password contains a semicolon ";"​ \\ 
-This method will not work if WiFi network does not have a password / open system</​wrap>​ 
- 
-<file gcode wifi_setup.gcode>​ 
-; G-Code generated by Matthew Upp 
-; WiFi SSID & Password for Malyan M200 & MP Select Mini 
- 
-; Look below and replace "​SSID"​ with the name of your WiFi network - don't leave spaces after the SSID name 
-; Look below and replace "​PASSWORD"​ with the password for your WiFi network - don't have spaces after the password 
-; This method will not work if WiFi password contains a semicolon ";"​ 
-; This method will not work if WiFi network does not have a password / open system 
-; Lines with only a semicolon are for making line separations only 
- 
- 
-M106 S0 ; turn fan off in case it was already on 
-M106 S200 ; turn fan on to signify start 
-G28 X Y ; home X & Y 
- 
- 
- 
-M550 SSID 
-M551 PASWSORD 
- 
- 
- 
-G1 X60 Y60 F1000 ; CENTER bed to signify completion 
-M106 S0 ; turn fan to signify completion 
-M84 ; disable motors 
- 
-</​file>​ 
- 
- 
-==== Access through web browser: ==== 
-Check IP address displayed on LCD, copy this address to web browser in computer. 
- 
-=== Connecting Malyan M200 (Monoprice Select Mini) to WiFi and Controlling with Repetier-Host:​ === 
-https://​youtu.be/​UQkVYsSrpVw 
-or 
-https://​youtu.be/​XuO_UaUFlBI 
- 
-{{youtube>​UQkVYsSrpVw?​medium}} ​   {{youtube>​XuO_UaUFlBI?​medium}} 
wifi.1478964648.txt.gz · Last modified: 2016/11/12 15:30 by Matthew Upp